SICK VMS4100 Operating Instructions

3 SYSTEM DESCRIPTION
42
8023994-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4100/5100
Subject to change without notice
Fig. 36: Sample label for the metrology marking, CE marking, and number of the notified body
with the type label for the SIM2000 system controller
Legend
1 Metrology marking
2 Type label of the SIM2000 system controller
• A metrology identification label must also be attached.
• The metrology marking – M18 for the year 2018 in the above figure – must be
indicated in accordance with Article 21 of the MID.
• Additionally, the CE marking and the number of the notified body – 0102 for PTB in
the above figure – must be indicated.
• After successful completion of the commissioning and conformity assessment
procedures, the type label for the SIM2000 system controller must be affixed to
the metrology information label.
NOTE! The nature of the metrology information label must be such that its removal will
result in the destruction of the label itself or of a security seal.
VMS5100 metrology
information label

SICK VMS4100 Specifications

General

Brand	SICK
Model	VMS4100
Category	Industrial Equipment
Language	English