SYSTEM DESCRIPTION 3
8023994-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4100/5100
3.5.3 Data output
Fig. 29: Data output (host telegram)
Legend
1 Data output via Ethernet
2 Data output via fieldbus
3 Data output via RS-232 / RS422
• The SIM2000 system controller assigns the calculated measurement results to the
respective object.
• The measurement results are issued to a higher-level system.
• The data is issued via a host telegram coordinated by the customer.
• The calculated 3D point cloud of the calculated model can also be optionally outputted
here.
Fig. 30: Data output (VMS5100)
Legend
1 Saving of measurement results in alibi memory
2 Display of measurement results on LFT display
3 Data output via Ethernet, fieldbus, RS-232 / RS422
• On a VMS5100 operated in a legal-for-trade application, the measurement results are
saved in the SIM2000 system controller’s alibi memory, which is required for legal-for-
trade verification, before being outputted.
• The measurement results are also displayed on the LFT display.
VMS5100 data output
To Next Page
Loading...
