SICK VMS4100 Operating Instructions

7 MAINTENANCE AND REPAIR
98
8023994-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4100/5100
Subject to change without notice
7.1 Monitoring and cleaning work
7.1.1 Control measurements
▸
Ensure proper functioning of the multi-dimensional measurement system by means
of regular controls.
▸
To do so, check the measurement accuracy of the multi-dimensional measurement
system using defined test objects.
▸
If any unexpected deviations are found, check the multi-dimensional measurement
system for mechanical damage.
▸
Should the multi-dimensional measurement system show signs of mechanical damage,
contact SICK Service.
▸
Place the reference object in a centered position on a conveyor element.
NOTE! The 2D LiDAR sensor needs to be able to detect the entire reference object
when it passes the laser line.
▸
Make sure that the reference object does not change its spatial position when passing
the laser line.
7.1.2 Visual control
▸
Regularly check the conveying equipment for damage or contamination.
▸
Replace any damaged belt elements immediately.
▸
Check the electrical installation regularly.
▸
Make sure that all cable connections are secure.
▸
Replace any damaged connecting cables immediately.
Operational check
of the volume
measurement
Visual inspection of the
conveying equipment
Visual inspection
of the cables

SICK VMS4100 Specifications

General

Brand	SICK
Model	VMS4100
Category	Industrial Equipment
Language	English