SYSTEM DESCRIPTION 3
8023994-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4100/5100
Fig. 43: Security seals on the SIM2000 system controller
Legend
1 Manipulation guard
2 Security seal on the manipulation guard
3 Security seal on the service flap
4 Data lines X11 + X12 (optional X9+X10) protected against removal
5 Shielded cable entries (typically signal supplies X5 to X7)
• A manipulation guard protects the SIM2000 system controller installed in the cabinet
against disassembly and removal of the connections.
• The manipulation guard is sealed.
• The service flap on the upper side of the system controller is also sealed to prevent
the microSD memory card containing the alibi memory from being removed.
NOTE! The guard also prevents the DIP switch from shifting.
Security seal
on the SIM2000
system controller
To Next Page
Loading...
Need help?
General
