13.D Manufacturers
13.D.1 SIEB & MEYER Accessories
In the following you find all accessories for SD2S that you can order at
SIEB & MEYER.
Consider the information on accessories suitable for your device in the tech‐
nical manual.
13.D.1.1 Connectors of the Series SD2S
Connector/cable kits
SIEB & MEYER article number Device variant
32299600 0362149xy, 0362249xy, 0362129xy
A connector kit contains mating connectors for motor connection, mains supply, ballast
resistor, I/O contacts and safety as well as a suitable shield connection clamp. All
items are manufactured by Phoenix Contact.
Submin D mating connectors for connecting the used measuring systems
are not comprised in the connector kits.
Fiber optic connectors
SIEB & MEYER article number
Description
12540102 Female connector, input (black)
12540202 Female connector, output (gray)
32022900 Cable connector (Toslink F05)
47000001 Polishing disk for optical fiber cables
47000002 Dismantling tool for optical fiber cables
47000003 Grinding paper
13.D.1.2 Operating Terminal
SIEB & MEYER article number
Description
0362150 Plug-on operating terminal
0362153 Operating terminal for switch cabinet installation
32299567 Switch cabinet kit for operating terminal 0362150
13.D.1.3 Ferrite Core for Motor Cable
SIEB & MEYER article number
Description
13163110 R 63/38/25, Al = 15150 nH
W
Appendix D: Manufacturers
Drive System SD2S - Hardware Description 0362X49xy / 0362129xy 109
13.D
To Next Page
Loading...
Need help?
General
