Overview
1.7 Communication and approved controllers
Wireless Teach Pendant F IWLAN V2
22 Operating Instructions, 08/2010, A5E02453837-01
Additional access points and WLAN products are available in the Internet at: Industry Mall
(http://mall.automation.siemens.com
)
1.7 Communication and approved controllers
Number of communication connections
Communication link Wireless Teach Pendant F IWLAN V2
Quantity, max. 6
Approved PLCs
NOTICE
Safety-related communication
A non-fail-safe controller cannot ensure safety-related communication.
A SIMATIC S7F PLC is required for safety-related communication.
Approved protocols
The HMI device uses the following protocols for communication with the controller:
● PROFINET
● PROFIsafe Mode V2.0
1.8 Software requirements
You need the following software for fail-safe operation:
● WinCC flexible 2008, SP2
● STEP 7 V5.4, as of SP2
● "SIMATIC S7 Distributed Safety V5.4" as of SP3 option package
● Customer-specific WinCC flexible 2008 SP2 add-on for the Wireless Teach Pendant F
IWLAN
To Next Page
Loading...
