Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
3
Preface
Purpose of the operating instructions
These operating instructions provide information for manuals derived from the requirements
for mechanical engineering documentation according to DIN EN 62079. This information
relates to the place of use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for:
● Users
● Commissioning engineers
● Maintenance personnel
Pay particular attention to the section "Safety instructions and standards (Page 35)".
You can find
more information such as operating in
structions, examples and reference
information in the online help of WinCC flexible.
Required knowledge
General knowledge of automation technology and process communication is needed to
understand the operating instructions.
It is also assumed that those using the manual have experience in using personal computers
and an understanding of Microsoft operating systems.
Scope of this manual
The manual applies to the "Wireless Teach Pendant F IWLAN V2" HMI device in
combination with the following software:
● STEP 7 V5.4, as of SP2
● Add-on package "S7 Distributed Safety", V5.4, as of SP3
● WinCC flexible 2008, SP2
NOTICE
Manual belongs to HMI device
The supplied manual belongs to the HMI device and is also required to repeat
commissioning. Keep all supplied and supplementary documentation for the entire
service life of the HMI device.
Provide all stored documents to subsequent owners of the HMI device.
To Next Page
Loading...
