Siemens F IWLAN - 4 Mounting and Connection; Check the Scope of Delivery; Installing an RFID Tag

Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
63
Mounting and connection
4
4.1 Check the scope of delivery
Check the scope of delivery for completeness and visible signs of transport damage.
NOTICE
Do not use damaged parts
If you use defective parts from the scope of delivery, you may experience malfunctions.
If you find defective parts in the scope of delivery, contact your Siemens partner. Only
install undamaged parts.
4.2 Installing an RFID tag
Requirement
● 1 RFID tag
● 1 fixing pocket
● 2 M4 cylinder head screws with nuts, if required
● An installation location has been selected for the RFID tag as described in the section,
"Planning an installation location for RFID tags (Page 54)".
If installing on a metallic base:
●
1 spac
er
● 4 M4 cylinder head screws with nuts, if required
Note
The mounting brackets on both sides of the spacer permit fixation with cable ties.
0RXQWLQJKROH
0RXQWLQJKROH
%UDFNHW
PRELIMINARY II
1.7.2010