Mounting and connection
4.7 Switching off the HMI device
Wireless Teach Pendant F IWLAN V2
82 Operating Instructions, 08/2010, A5E02453837-01
Result
The HMI device is ready for operation when the loader displays one of the following dialogs:
● "Transfer" dialog
● "Testing enabling button" dialog
4.7 Switching off the HMI device
The following procedure applies to an HMI device on which there is no project. The way the
device is switched off therefore differs from that of an integrated HMI device.
Procedure
Proceed as follows:
1. Press the "ON/OFF" button on the HMI device at least 4 seconds.
The HMI device switches off.
See also
Switch-off behavior (Page 208)
To Next Page
Loading...
