Siemens F IWLAN - Configuration and Process Control Phases

Overview
1.10 Configuration and process control phases
Wireless Teach Pendant F IWLAN V2
26 Operating Instructions, 08/2010, A5E02453837-01
Functions for RFID tag system
Configuration
Number of RFID tags in the project, maximum 127
Number of effective ranges in the project, maximum 127
Number of RFID tags per effective range, maximum 127
Number of HMI devices with logon authorization per effective
range,
when using F_FB_RNG_4
1)
, maximum
4 HMI devices
Number of devices with logon authorization per effective range,
when using F_FB_RNG_16
1)
, maximum
16 HMI devices
1) F_FB: Fail-safe function block
1.10 Configuration and process control phases
You must follow the phases below in order to use an HMI device in the system:
● Configuration phase
● Process control phase
Configuration phase
The configuration phase consists of the following operations:
● Create project
● Transferring a project
● Accept project – determine checksum
● Test project
● Simulate project
● Save project
&RQILJXUDWLRQ3&
6DIHW\UHODWHGSURMHFW
:LUHOHVV
7HDFK3HQGDQW),:/$1
Process control phase
The process control phase includes operation and monitoring of active production processes
with the HMI device. The HMI screens on the HMI device visualize the production process.
PRELIMINARY II
1.7.2010