5
Operation
102
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
5 Operation
In this part of the document you will find brief descriptions and detailed operation
sequences for the important functions of the fire detection installation. You use
your fingers to operate the fire terminal (Touch) FT2080 via a touch-sensitive touch
screen.
The 'Silence buzzer', 'Acknowledge', 'Reset' and 'Alarm device' are on the touch
screen and available as standard buttons on the Person Machine Interface.
5.1 ALARM procedure
If your fire detection system has no delayed alarm transmission function ('AVC'),
the variant 'Fire Brigade in' 'mm:ss' in Step 2 (see below) does not apply.
1 <Acknowledge> 5 <Alarm device>
2 Status information A 'All alarm delays off'
3 'Intervent.txt.' if displayed R <Reset>
4 Indication of the fire location on the display
To Next Page
Loading...
Need help?
General
