Siemens FT2080

5
Operation
Settings / Administration
148
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
'Delete PIN'
w PIN is present.
w You are logged onto 'Access level' 3.
w You are in the 'Manage PINs' menu.
1. Select the 'Delete PIN' menu item.
a In the menu, the PIN entry dialog window is displayed as 'Delete PIN'.
a Body text 1: Enter PIN
2. Enter a valid PIN via the number pad and press .
a In the menu, the PIN entry dialog window is displayed as 'Delete PIN'.
a Body text 1: Verify PIN
3. Enter the same PIN again and press .
a The command execution display confirms successful execution of the
command by displaying .
a The PIN has been deleted.
See also
2 Manage PINs menu [➙ 45]
2 PIN entry dialog window [➙ 71]
5.9.2 Change language
Depending on the country
-
specific ↑
BDV, either one or two firmware languag
es
are integrated.
'Change language'
w You are logged onto 'Access level' 2.1.
l Press 'Change language' on the GTB.
a The command execution display confirms successful execution of the
command by displaying .
a The language has been selected.