Siemens FT2080 User Manual

5
Operation
Changing visibility
132
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
a The event list 'System messages' is displayed.
2. Select 'PMI exp'.
a The highlighted list entry is displayed in yellow.
3. Press 'Options' in the ECL.
a The 'Select option' dialog window opens.
4. Select the 'Execute commands' menu item.
a The 'Select command' dialog window is displayed.
5. Select the 'Activate expanded visibility' command.
a The command execution display confirms successful execution of the
command by displaying .
a 'Expanded visibility' is deactivated.
5.6.2 Deactivating standby
'
PMI standby
visibility
' cannot be activated manually.
The 'Deactivate standby visibility' command is only available once the monitored
'Station' or the ↑ management station is back in normal operation.
w The 'PMI standby visibility' is active.
w The monitored 'Station' or the management station is in normal operation.
1. Press the 'Information' tab.
a The event list 'Information' is displayed.
2. Highlight the 'PMI standby visibility' list entry.
a The highlighted list entry is highlighted in a different color to the other
entries.
3. Press 'Options' in the ECL.
a The 'Select option' dialog window opens.
4. Select the 'Execute commands' menu item.
a The 'Select command' dialog window is displayed.

Siemens FT2080 Specifications

General

Brand	Siemens
Model	FT2080
Category	Touch terminals
Language	English