Operation
5
121
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
Sabotage evaluation OFF
w Sabotage evaluation is switched on.
w You are logged onto 'Access level' 3.
1. Press the button 'Topology' on the GTB.
a The 'Topology' dialog window opens.
2. Press 'Lower level' in the 'Hardware tree' list entry.
a All 'Areas' in the 'Detection tree' are displayed.
3. Press <'Lower level'> in the list entry of the 'Station' to which the 'Key depot' is
connected.
a The elements of 'Station' are displayed.
4. Press 'Lower level' in the 'Fire brig. periphery interf. (FCI2001)' list entry.
a The elements of 'Fire brig. periphery interf. (FCI2001)' are displayed.
5. Select 'Key depot'.
a The highlighted list entry 'Key depot' is displayed with a bright background.
6. Press 'Execute commands' on the dialog window toolbar.
a The 'Select command' dialog window opens.
7. Select the 'Sabotage evaluation OFF' command.
a The command execution display confirms successful execution of the
command by displaying .
a Sabotage evaluation is switched off.
To Next Page
Loading...
