Operation
5
Enabling detector exchanger and tester c
143
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
a The 'Select command' dialog window opens.
8. Select the 'Enable MC link' command.
a The communication between the detector exchanger and tester and the
'Station' has been enabled.
Canceling enabling
1. .Repeat steps 1 - 7 of the instruction of the process to enable detector
exchanger and tester communication.
a The 'Select command' dialog window opens.
2. Select the 'Disable MC link' command.
a The enabling of communication between the detector exchanger and tester and
the 'Station' has been reset.
To Next Page
Loading...
