Siemens M20 Terminal

AT command interface
Version 8 dated 15.03.00 115
Siemens Information and Communication Products
A
AT^SFPCS Far party call status
Test command
AT^SFPCS=?
Response
OK
Read command
AT^SFPCS?
Response
^SFPCS: <mode>
Parameter
<mode> 0 or 1 representing the setting of unsolicited result code presentation.
Set command
AT^SFPCS=<mo-
de>
Response
Set the presentation of unsolicited result codes or query status of current calls.
^SFPCS: <idx>, <hld>, <mpty> if <mode> = 2
Parameter
<mode> (mode of presentation)
0
Unsolicited result codes off
1 Unsolicited result codes on
2 Query status of all connections
<idx> Call index (value as in AT+CLCC)
<hld> (Call is on held by remote party):
0 no
1yes
<mpty> (Call is in multiparty by remote party):
0no
1yes
Reference Unsolicited result code
Unsolicited result codes are sent only by state change on remote party:
^SHELD: <idx>, <hld>
^SMPTY: <idx>, <mpty>