Siemens M20 Terminal User Manual

AT command interface
Version 8 dated 15.03.00 71
Siemens Information and Communication Products
A
AT+CPAS Mobile equipment activity status
Test command
AT+CPAS=?
Response
+CPAS: (list of supported <pas>s) OK
Parameter
see execute command
Execute command
AT+CPAS
Response
TA returns the activity status of ME.
+CPAS: <pas> OK
Parameter
<pas> 0 ready
2 unknown (ME is not guaranteed to respond to instructions)
3 incoming call (ringing)
4 call in progress or call hold
Reference
GSM 07.07
Note
AT+CPBF Find phonebook entries
Test command
AT+CPBF=?
Response
+CPBF: [<nlength>], [<tlength>] OK
Note:
In case of SIM storage, the lengths may not be available. If storage does not offer format in-
formation, the format list should be empty parenthesis.
Parameter
see execute command
Execute command
AT+CPBF=
<findtext>
Response
TA returns phonebook entries (from the current phonebook memory storage selected with +CPBS)
which alphanumeric fields contains <findtext>.
[+CPBF: <index1>,<number>,<type>,<text>[[...]
<CR><LF>+CBPF: <index2>,<number>,<type>,<text>] OK]
If error is related to ME functionality:
+CME ERROR: <err>
AT+CPBF=""
Response
List of all phonebook entries in currently active phonebook (+CPBS).
Parameter
<index1>,
<index2> integer type values in the range of location numbers of phonebook memory
<number> string type phone number of format <type>
<type> type of address octet in integer format; 145 when dialling string includes in-
ternational access code character "+", otherwise 129
<findtext>,
<text> string type field of maximum length <tlength>
<nlength> integer type value indicating the maximum length of field <number>
<tlength> integer type value indicating the maximum length of field <text>
Reference
GSM 07.07
Note

Siemens M20 Terminal Specifications

General

Brand	Siemens
Model	M20 Terminal
Category	Engine
Language	English