AT command interface
Version 8 dated 15.03.00 73
Siemens Information and Communication Products
A
AT^SPBA Browse the phonebook alphabetically
Test command
AT^SPBA=?
Response
^SPBA: <nlength>,<tlength> OK
If error is related to ME functionality:
+CME ERROR: <err>
Execute command
AT^SPBA=
<browsetext>
Response
TA returns three phonebook entries in alphabetical order.
^SPBA: <index1>,<number>,<type>,<text> <CR,LF>
^SPBA: <index2>,<number>,<type>,<text> <CR,LF>
^SPBA: <index3>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<browsetext>searched text: "stringtext" (maximal length <tlength>)
<index1> Index of the previous phonebook entry (related to <browsetext>) in alphabetical or-
der
<index2> Index of the searched phonebook entry
<index3> Index of the next phonebook entry (related to <browsetext>)in alphabetical order
<nlength> maximum length of phone number
<tlength> maximum length of text
<index> location number
<number> phone number
<type> type of number; e.g. 145 when dialling string includes international access
code character “+”, otherwise 129
<text> string type field of maximum length <tlength>
Reference Note
This command can be used for the ME, SM, MT, ON and FD phonebook.
For examples refer to
8.2.7.6 “Using the AT^SPBA Browse the phonebook alphabetically and AT^SPBS
Steps the selected phonebook alphabetically Command” on page 168
.
To Next Page
Loading...
Need help?
General