Siemens NXAIR - Page 145

Accessing the connection compartment through the rear
110-0084.9 / 15 NXAIR / ≤ 40 kA 145
Remove the sealing brackets (2), and store them.
(2)
Sealing brackets
Fig. 213: Contactor panels with panel width 435 mm only:
Removing the sealing brackets
Remove the connecting elements from the rear wall:
• 3 bolts M8x20 with contact washers (3)
To remove the rear wall (4), pull at the handle. Store the rear wall together with the associated
connecting elements.
(3)
Bolts to remove
(4)
Rear wall with handle
Fig. 214: Contactor panels with panel width 435 mm only:
Removing the rear wall
✓
Access to the connection compartment through the rear side of the panel is given.
2
3
4