Siemens NXAIR - Page 168

Electrical connections
168 NXAIR / ≤ 40 kA 110-0084.9 / 15
Fig. 238: Pre-assembled bottom pan
(1)
Front plate
(2)
2 floor covers
(3)
4 bolts M8x20
(4)
1 cable bracket
(5)
4 nuts M8 plus
4 plain washers 8 acc. to
ISO 7093
(6)
Right side wall
(7)
1 rubber sleeve
(8)
Rear wall
(9)
Left side wall
(10)
8 hexagon head bolts M8x16
plus
8 contact washers 8
Bolt the side walls with the connecting elements (1), and the front plate and the rear wall with
the connecting elements (2) from the bag unit onto the studs of the connection compartment.
Bolt the front plate / rear wall and side walls together using the stored connecting elements (3).
Fig. 239: Assembly of the lateral parts
(1)
8 hexagon head bolts M8x16
plus 8 contact washers size 8
(2)
8 hexagon nuts M8 plus 8 plain
washers size 8 acc. to
ISO 7093 (from bag unit)
(3)
4 nuts M8 (from bag unit)