Siemens NXAIR - Page 181

Closing the connection compartment / connection duct
110-0084.9 / 15 NXAIR / ≤ 40 kA 181
Fig. 261: 2 bolted joints on base frame at the front
Tighten the lateral bolts M8x20 at the vertical partition and the base frame hand-tight. Tighten
the bolts with a tightening torque of 25 Nm. Proceed in the same way on the other side.
Fig. 262: 6 lateral bolted joints on partition and base frame
Tighten the upper bolts M8x20 at the vertical partition hand-tight. Tighten the bolts with a
tightening torque of 25 Nm.
Fig. 263: 4 bolted joints on partition
Fold the air guide downwards.