Siemens NXAIR - Service Truck; Service Truck Versions

Unloading and erection
110-0084.9 / 15 NXAIR / ≤ 40 kA 35
Craning angles according to panel design
In the following, the craning angles and their mounting locations are exemplarily shown for some panel versions
to explain the principles.
Fig. 29: Example for a panel without end wall: Fig. 30: Example for a panel with end wall:
4 craning angles with 3 bolted joints M8x20 each 3 craning angles with 3 or
2 bolted joints M8x20 each
Fig. 31: Example for a panel with rear duct:
4 craning angles with 3 or 2 bolted joints M8x20 each