Siemens NXAIR - Page 40

Unloading and erection
40 NXAIR / ≤ 40 kA 110-0084.9 / 15
Attaching heavy weight slings
The heavy weight slings are to be attached to the protrusions A of the crane rods.
Place the heavy weight slings on the crane rods as close as possible to the craning angles.
Do not attach the heavy weight slings to the ends of the crane rods.
Fig. 37: Heavy weight sling
attached correctly
Fig. 38: Heavy weight sling
attached incorrectly
Distances:
(1)
Clearance between crane rod and crane hook:
> 2000 mm
(2)
Protrusion A:
> 300 mm
Fig. 39: Distances for craning
The panel is prepared for craning with crane rods.
✓
1
2