Control
Sample streams
Max. 32
Sample sequence
32 lines, sample enable list
Analytical method
One in the chromatograph
Any number in the control unit
Time program
2 x 55 lines
Clock time program
16 lines
for valves and BASIC programs
Chromatogram on the recorder
2 channels
Status display
Freely selectable using status form for
digital output
Alarm
,
digital output
Maintenance request
and for printer
Approx. 80 individual messages:
Controllers, detectors,
analysis control, gas supply,
housing temperature, BASIC programs,
peripherals, automatic updating
Ready signal
Digital output 24 V/0.4 A
Relay contact, max. 0,5 A / 100 V / 10 W
Purging alarm
Floating contact, max. 1 A
Two-channel evaluation
Evaluation procedure
Area standardization
External standard
Mixed mode = area standardization and external standard
100% for all peaks in the component list
Internal standard
Chromatogram display
On the screen
Mouse operation
Peak markers, names, retention times
Zoom with pilot chromatogram
Peak recognition
Automatic, can be parameterized
Peak separation
Perpendicular or tangent
Component list
2 x 64 components
Results
ASCII file
Raw data
Compressed for storage of chromatogram
Uncompressed for new calculation in control computer
Result log
Optional design using BASIC
Trend recording
With BASIC and analog outputs
Calibration
Manual,
automatic updating
BASIC, possible applications
Calculation of results,
determination of status,
calculation of external signals
via analog and digital inputs
Recommended control unit
IBM-compatible personal computer
Desktop or Laptop
Processor
80386SX or larger
Clock
≥33 MHz
Hard disk
≥ 40 MB
Diskette drive
3.5" / 1.44 MB
Graphic adapter
VGA, EGA, CGA
Interfaces
2 x serial
1 x parallel
RAM
≥ 640 kB
Operating system
MS-DOS 6.2
Mouse
For chromatogram operations
Technical data
26
3DATEN.CHP, Stand Dezember 22, 1999
To Next Page
Loading...
