Siemens SCALANCE XC-200 Set Up And Configuration

3 Configuration and commissioning of the Service Bridge
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
16
 Siemens AG 2019 All rights reserved
5. Open the shortcut menu by right clicking on the switch and then click on "Set
Network Parameters". Optionally, you can use the "Start Flashing LED"
function in the shortcut menu to make sure that you have selected the correct
switch.

Siemens SCALANCE XC-200 Specifications

General

Brand	Siemens
Model	SCALANCE XC-200
Category	Switch
Language	English