Setting up and connecting the device
3.1 Preparation
MD-34A
32 Operating Instructions, 08/2023, A5E52427535-AA
Procedure
1. Check the delivery unit for any signs of visible transport damage.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
2. Unpack the device at its installation location.
3. Keep the original packaging in case you have to transport the unit again.
4. Check the scope of delivery (Page 31) for completeness and damage.
Please inform the delivery service immediately if the package contents are incomplete or
damaged or do not correspond with your order.
5. Please keep the documentation in a safe place. It is required for initial commissioning and is
part of the device.
6. Record the Device identification data (Page 32).
3.1.3 Device identification data
The device can be clearly identified with the help of the identification data in case of repairs
or loss.
The figures below are examples. The data of your device can differ from the data in these
examples.
Rating plate
The rating plate is located on the rear of the device.
Example:
To Next Page
Loading...
Need help?
General
