Siemens SIMATIC IPC MD-34A User Manual

Technical data
8.2 Technical specifications for accessories
MD-34A
82 Operating Instructions, 08/2023, A5E52427535-AA
Device function
Data
Value
Docking connector
1 × 19-pin docking connector
LAN
1 x connection RJ45-10/100/1000 Giga-
LAN
Expansion port
1 × expansion port for USB 3.0 / UART
(optional)
Environment
Relative air humidity during operation
10% to 90%, no condensation
Operating temperature
0 °C to 45 °C
Storage temperature
-30 °C to 70 °C
Shock MIL-STD-810H Method 516.8 Procedure
I
Vibration
MIL-STD-810H Method 514.8 Procedure
I
Drop test
MIL-STD-810H Method 516.8, 4 ft.
Degree of protection IP65 – protected against ingress of
dust, contact, and water jets from any
angle
Safety function
Trusted Platform Module (TPM) 2.0
Supported
Kensington lock
Supported
Operator controls
Buttons
1 × On/Off button
2 × programmable function key
Power supply
Battery
11.4 V (typ. 3500 mAh), designed as a
lithium-ion battery (3S1P), can be re-
placed during operation (optional)
Battery life
Standard battery: 6 hours
Nominal voltage
19 V DC
Power supply unit
100–240 V, 50–60 Hz / 19 V DC
Certification
Certification
CE, FCC
8.2 Technical specifications for accessories
Device function
Data
Value
Barcode reader
Barcode reader (optional)
For 1D code and 2D code
Accessories Standard: Power supply unit and power supply
cord
Optional
Battery pack
Battery charger
Hand strap
Shoulder strap
Desk docking
Vehicle docking

Siemens SIMATIC IPC MD-34A Specifications

General

Brand	Siemens
Model	SIMATIC IPC MD-34A
Category	Industrial Equipment
Language	English