Siemens SIMATIC IPC MD-34A User Manual

Firmware/BIOS description
7.2 Configure firmware
MD-34A
74 Operating Instructions, 08/2023, A5E52427535-AA
Firmware setting Value Setting in delivery
state
Meaning
Step(tm)
Enabled
x
es to be supported.
Intel(R) Speed
Shift Technology
Disabled
Enabling Intel(R) Speed Shift Tech-
nology will expose the CPPC v2 inter-
face to allow hardware-controlled P-
state.
Enabled
x
Turbo Mode
Disabled
x
This configuration is unavailable if
Intel(R) SpeedStep(tm) is disabled.
Enabled
C state
Disabled
Enabling it to allow CPU to go to C
state when it's not fully utilized.
Enabled
x
7.2.2.2 System Agent (SA) Configuration
You can configure System Agent parameters here.
Calling "System Agent (SA) Configuration"
Select: "Setup Utility (Page 71)" > "Advanced" > "System Agent (SA) Configuration".
Firmware setting Value Setting in delivery
state
Meaning
VT-d
Supported
Intel® VT-d (Virtualization Technology
for Directed I/O) can help you improve
security and reliability of the system
and improve performance of I/O de-
vices in virtualized environment.
VT-d
Disabled
Enabled x
7.2.2.3 PCH-IO Configuration
You can configure USB settings here.
Calling "PCH-IO Configuration"
Select: "Setup Utility (Page 71)" > "Advanced" > "PCH-IO Configuration".
Firmware setting Value Setting in delivery
state
Meaning
USB Port Disable
Override
Disable
x
Enable or disable the corresponding
USB port to report a Device Connec-
tion to the controller.
Select Per-Pin
The following options show only when "USB Port Disbale Override" = "Select Per-Pin".
TYPE A USB 3.0
Disabled
Enable or disable USB port. Once the
port is disabled, any USB devices
plugging into the port will not be
detected by BIOS or OS.
Enabled
TYPE USB 3.0 AND
SD CARD
Disabled
Enabled
TYPE C USB 2.0
Disabled
Enabled

Siemens SIMATIC IPC MD-34A Specifications

General

Brand	Siemens
Model	SIMATIC IPC MD-34A
Category	Industrial Equipment
Language	English