Siemens SIMATIC IPC MD-34A User Manual

Firmware/BIOS description
7.2 Configure firmware
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
73
Select: "Setup Utility (Page 71)" > "Main" > "Language".
Firmware set-
ting
Value Setting in deliv-
ery state
Meaning
Language
English
x
BIOS display language.
French
Chinese
Japanese
Calling "System Time" or "System Date"
Date or time settings.
Select: "Setup Utility (Page 71)" > "Main" > "System Time" or "System Date".
Firmware setting
Explanation
System Time
Set current device time in the format [Hour:Minute:Second]
System Date
Set current device date in the format [Month/Day/Year]
Key functions for setting the numeric time and date values
Button
Function
<Enter>
Switch between the setting options within a firmware setting, for example,
from hour to minute.
[+] [-]
Increase or decrease desired value.
[0] - [9]
Enter desired value.
7.2.2 "Advance" tab
7.2.2.1 Power & Performance
You can have power management control options here.
Calling "CPU - Power Management Control"
Select: "Setup Utility (Page 71)" > "Advanced" > "Power & Performance" > "CPU - Power
Management Control".
Firmware setting Value Setting in delivery
state
Meaning
Boot performance
mode
Max Battery
Select the performance state that the
BIOS will set starting from reset vec-
tor.
Max Non-Turbo
Performance
Turbo Perfor-
mance
x
Intel(R) Speed-
Disabled
Allow more than two frequency rang-

Siemens SIMATIC IPC MD-34A Specifications

General

Brand	Siemens
Model	SIMATIC IPC MD-34A
Category	Industrial Equipment
Language	English