Operation
7.2 Monitoring
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
103
Figure 7-9 Monitoring – "Signal definitions" tab
You specify which signals of the BM or the CMR you want to monitor.
In the upper part of the page, you will see a list with the currently configured signal
definitions:
● A maximum of 32 signal definitions are possible.
In the lower part of the page, under "Change signal definition", you will find the area required
for signal configuration.
If you click the "Apply" button, all the settings you made in the "Signal definitions" tab are
adopted and displayed in the list.
To Next Page
Loading...
