Configuration
6.6 Maintenance
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
67
Save configuration on SD card
configuration with a fixed name is permitted on the SD card.
You can do the following with a configuration of the CMR:
1. Save it on the SD card.
2. If necessary transfer it to other devices of the same type.
● Click the "Save on SD card" button.
Meaning of the configuration files "user.cfg" and "default.cfg"
The configuration saved using the button is stored as "user.cfg". At the same time an
automatically backed up configuration file with the name "default.cfg" is stored. "default.cfg"
is updated with each change to the configuration. If the SD card with the "default.cfg" file is
inserted in a brand-new CMR or in a CMR that has been reset to the factory settings, the
"default.cfg" file will be loaded.
Figure 6-8 Maintenance – "Firmware" tab
In the "Firmware" tab:
● You will find information on the firmware currently installed on the CMR.
● Update the firmware version of the CMR.
To Next Page
Loading...
