Siemens SIMATIC LOGO! CMR2020 - Start Page

Configuration
6.3 Start page
LOGO! CMR2020 / LOGO! CMR2040
54 Operating Instructions, 09/2014, C79000-G8976-C356-01
6.3
Start page
Figure 6-1 Start page– "Overview" tab
Login
After successfully logging in (Page 49), the start page of the CMR appears.
Display of the current operating status
The start page shows an overview of the current operating status of the CMR.
General
Module name
Display of the name you assigned on the "System" (Page 56) page.
Module type
LOGO! CMR2020 or LOGO! CMR2040 depending on which device you are using.
Plant description
Display of the name you assigned on the "System" (Page 56) page.
System runtime
(dd:hh:mm:ss)
Display of the system runtime of the CMR since the last restart.
Ethernet interface
IP address
IP address of the CMR
Link status
• If a connection exists between the PC and the CMR "Up" is displayed.
• If there is no connection between the PC and the CMR "Down" is displayed.
Connected for (dd:hh:mm:ss)
Display of the time of the connection between the PC and the CMR.
Mobile wireless interface
Connection established Display of whether or not a connection to the mobile wireless network exists (Yes/No).
Connected for (dd:hh:mm:ss) Displays how long the connection has been established since last booking into the mobile
wireless network.