Siemens SIMATIC LOGO! CMR2020 - Syntax of All SMS Commands; SMS Commands

Operation
7.3 SMS message structures and examples
LOGO! CMR2020 / LOGO! CMR2040
122 Operating Instructions, 09/2014, C79000-G8976-C356-01
7.3.3
Syntax of all SMS commands
Syntax of the SMS commands and possible responses
What information would I like to have?
Example
Read diagnostics data from the CMR
DIAG?
Read GPS position from the CMR
GPSPOSITION?
Read process image (PI)
MONITOR?
Read status of the BM STATUS?
Read current value
LOGO?VM125,WORD
What do I want to influence?
Example
Set the status of the BM
Password;STATUS=RUN
Write current value
Password;LOGO=VM125,1,WORD
Set digital output of the CMR
Password;OUTPUT=O1,1
Change phone number of a user
Password;CHANGEUSER="Joe","01721234567"
Configure address of an NTP server
Password;NTPSERVER="217.13.75.19"
Query mobile wireless provider using a service
code
Password;SERVICECODE="*100#"
7.3.4
SMS commands
The following tables describe all the possible SMS structures of the SMS commands and
these are illustrated with examples.
Note
Only
1 SMS command is possible per SMS message to the CMR.
Note
Use of prepaid SIM cards
If you use a prepaid SIM card, you can query the current credit using the appropriate service
code of your provider.
If your credit has been used up, the CMR does not
send an automatic warning.