Operation
7.2 Monitoring
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
105
Figure 7-10 Monitoring – "Events" tab
For a selected signal, you define an event, for example "I1 changes to 0".
In the upper part of the page, you will see a list with the currently configured events:
● A maximum of 32 events are possible.
If you have not yet defined an event, the list is empty.
In the lower part of the page, under "Change event", you will find the area required for event
configuration.
If you click the "Apply" button, all the settings you made in the "Events" tab are adopted and
displayed in the list.
To Next Page
Loading...
