Configuration
6.2 Establishing a connection to the CMR
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
53
The Web user interface of the CMR is available in several languages.
At the top right you will see a drop-down list for the language selection. You can change the
language setting for the entire Web user interface at any time.
Automatic language selection
If, for example, the Web browser is set to the English language, the user interface of the
CMR is automatically displayed in English.
If the language setting of the Web browser is not supported, the user interface of the CMR is
displayed in English.
Changing the language setting
To change the language setting:
● Select the required language from the drop-down list at the top right of the start page.
The language setting is saved and is set correctly for the next access.
● If the language is not changed immediately, update the display in your Web browser: "F5"
key in the Internet Explorer.
To Next Page
Loading...
