EasyManua.ls Logo

Siemens SIMATIC LOGO! CMR2020 - PIN of the SIM Card

Siemens SIMATIC LOGO! CMR2020
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration
6.8 WAN
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
79
6.8.3.2
PIN of the SIM card
Entering the PIN
Note
SIM card without PIN
The CMR also works with SIM cards without a PIN. In this case, do not make an entry
in the
" PIN of the SIM card" input box.
Entry of an incorrect PIN
The last entered (incorrect) PIN is saved. This means that when changing the configuration
(except the PIN) or when restarting the CMR, no further PIN entry attempt is used up.
For this re
ason, do not change the PIN of the SIM card to the previously stored incorrect PIN
outside the CMR.
Locking if the PIN is entered correctly
Enter the PIN correctly. If you enter the PIN incorrectly three times, the SIM card will be
locked. You should also
note the information relating to inserting the SIM card and entering
the PIN
(Page 33).
Unlocking the SIM card
Unlocking t
he SIM card is described in the section Insert the SIM card and enter the PIN
(Page
33).
You have received a PIN for your SIM card from your mobile wireless provider.
1. Enter the PIN for your SIM card in the input box.
If you use a SIM card without a PIN, do not make an entry in the box.
2. By clicking the "Apply" button, you save the PIN with the other settings.
A green check mark below the input box indicates that the PIN was saved successfully on
the device.
A red dot with a white cross below the input box indicates that the PIN was entered
incorrectly and no PIN was stored on the device.

Table of Contents

Related product manuals