Operation
7.2 Monitoring
LOGO! CMR2020 / LOGO! CMR2040
98 Operating Instructions, 09/2014, C79000-G8976-C356-01
You assign certain actions to the defined events, for example sending an SMS message to a
particular recipient group if an output of the BM changes.
In the lower part of the page under "If:" and "Then:" you will see which action will be
executed along with all the set parameters.
Figure 7-6 Monitoring – "Overview" tab
All configured signal definitions of the BM and the CMR are displayed with symbolic names
and their current status.
After resetting to factory settings, the inputs and outputs of the CMR are displayed as when
shipped.
To Next Page
Loading...
