Configuration
6.2 Establishing a connection to the CMR
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
51
Disable other LAN connections
If other LAN connections are active on the PC, disable these LAN connections while you are
setting the configuration.
Follow the steps below if working with Windows 7:
1. In the Start menu, select the command "Start" > "Control Panel" > "Network and Internet"
> "Network and Sharing Center"
2. In "View your active networks" you will see the current LAN connections.
3. In "Access type: Connections", left-click on the relevant connection names.
The dialog box associated with the connection opens.
4. Click the "Disconnect" button.
The dialog closes, you have deactivated the required LAN connection.
To configure the CMR, a Web-based administration user interface (WBM) is available to you.
● At the left-hand page you will find a navigation panel.
● The main window displays the pages called according to your navigation (tabs).
● On the individual pages below the tab, you have the following options and information
available:
– Input boxes for entering text.
– Drop-down lists for selecting entries.
– Check boxes for enabling and disabling functions.
– Buttons such as "Apply", "Cancel" that can be clicked.
– Grayed out text boxes with information and instructions.
Recurring icons and displays on the pages
Login of the logged in user.
If you click this button, you exit the WBM and go to the Login page.
Time of the last page update of the CMR (date and time shown)
The displayed time is the time of day of the CMR when the Web
page was last updated.
The date and time of the CMR is updated regularly in the WBM
only if the automatic update is activated.
Select the required language of the WBM from the drop-down list.
To Next Page
Loading...
