Siemens SIMATIC LOGO! CMR2020 - Hardware Information

Configuration
6.4 System
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
57
Activating GPS
Activate/deactivate GPS reception.
Make sure that an antenna is connected to the GPS input:
● To activate GPS, select the entry "Yes" from the "Activate GPS" drop-down list.
● To deactivate GPS, select the entry "No" from the "Activate GPS" drop-down list.
"Apply" button
If you click the "Apply" button, all the settings you made in the "General" tab are adopted.
6.4.3
Hardware information
Figure 6-3 System – "Hardware information" tab
Hardware information on the CMR and the SD card.
System
● Display of the system runtime since the last restart.
● The article number and hardware product version of the CMR are also displayed.