Installation, connecting up, commissioning
4.8 Inserting the micro SD card
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
35
Inserting the micro SD card
Figure 4-3 Slot for the micro SD card (yellow rectangle)
The CMR supports all normal commercially available micro SD cards.
Do not remove/insert an SD card during operation
You can only remove or insert the SD card when the CMR is turned off/shut down.
If you remove or insert the SD card during operation, data on the card can be damaged.
Note
Recommended SD card
For example:
Memory: max. 4 GB
Max speed Class 6
FAT 32
Inserting the micro SD card
● Insert the SD card into the compartment until you can feel the card lock in place.
Removing the micro SD card
● By pressing, unlock the card and remove it from the slot.
To Next Page
Loading...
