Siemens SIMATIC LOGO! CMR2020 - Page 126

Operation
7.3 SMS message structures and examples
LOGO! CMR2020 / LOGO! CMR2040
126 Operating Instructions, 09/2014, C79000-G8976-C356-01
Set digital output of the CMR
Return values
OK or error message
Example Send SMS message: Password;OUTPUT=O1,1
Reply SMS message: OUTPUT=O1,1:OK
Changing the phone number of a user
Function Changing the phone number of a user uniquely specified by the <login>.
To use this function, the release must be entered for the selective use in the WBM under Users /
groups in the User tab Hotspot-Text (Page 89).
Access Writing, password required, right must be configured in the WBM
Structure and key-
word
<password>;CHANGEUSER="login","phone number"
Return values
OK or error message
Example Send SMS message: Password;CHANGEUSER="Joe","01751234567"
Reply SMS message: CHANGEUSER="Joe","01751234567":OK
Querying the mobile wireless provider about the service code
Function Querying a service code with the mobile wireless provider, e.g. "*100#".
The text transferred by the mobile wireless provider is returned unchanged as the reply in an SMS
message.
If you use a prepaid SIM card, and want to query the current credit:
The service code can be used to query your credit. You cannot, however, use all possible service
codes for queries.
Access
Writing, password required
Structure and key-
word
<password>;SERVICECODE="code"
Return values
Original reply of the mobile wireless provider or error message
Example Send SMS message: Password;SERVICECODE="*100#"
Reply SMS message: *100#: Original text of the mobile wireless provider or error message