Configuration
6.5 Diagnostics
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
63
Events logged in the diagnostics buffer
The following events are logged during operation of the CMR:
● Operating messages such as startup, change to the configuration.
● Establishment/interruption of the connection to the BM.
● Establishment/interruption of the connection to the mobile wireless network.
● Establishment/interruption of the mobile data connection.
● Warnings when reading in the configuration from an SD card or from the PC.
● Time-of-day synchronization
Saving a copy of the diagnostics buffer
To save a copy of the diagnostics buffer on your PC:
1. Click the "Save on PC" button. You cannot assign a file name; the file name of the copy
of the diagnostics buffer is preassigned: diagbuf.txt.
2. Select a suitable storage location on your PC.
To save a copy of the diagnostics buffer on an inserted SD card:
● Click the "Save on SD card" button.
It is not necessary to specify a storage location on the SD card.
Automatic saving in the event of a fatal error
1. By selecting the "With fatal error(s), automatically save a copy of the diagnostics buffer
on SD card" check box, the diagnostics buffer is automatically saved on the SD card.
2. You can then run an error analysis.
To Next Page
Loading...
