Siemens SIMATIC MV540 H - System Configuration with External Ring Light; Other System Extensions

Network and system integration
4.9 System configuration with external ring light
SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01
61
You can find additional information about visualization with an HTML browser in the WBM
online help.
4.9
System configuration with external ring light
The external ring lights do not require an additional power supply unit for the power supply.
Power is supplied via the S7 controller using a corresponding adapter cable.
An external ring light can be controlled via the stroboscope signal of the optical reader. In
this case, the ring light must be supplied with power by an external power supply.
4.10
Other system extensions
System integration via Ethernet/IP connection
System integration via Ethernet/IP connection is possible with the RFID 181EIP
communication module.