4.5.8.4 SNTP Client
Time-of-day synchronization in the network
SNTP (Simple Network Time Protocol) is used for synchronizing the time in the network. The
appropriate frames are sent by an SNTP server in the network.
Note
To avoid time jumps, make sure that there is only one time server in the network.
Requirement
To receive the SNTP frames, enable the entry "System Time" under "Security > Firewall >
Predefined IPv4 rules".
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 163
To Next Page
Loading...
