4.4.5.3 Firewall Log
The firewall log logs the events that occurred on the firewall. When you create firewall rules, you
can specify the event severity with which they are logged.
Description
● Severity Filters
You can filter the entries in the table according to severity. To display all the entries, enable
or disable all parameters.
Note
For each severity, a maximum of 400 entries in the table are possible. If the maximum
number of entries is reached for a severity, the oldest entries of this severity are overwritten
in the table. The table remains permanently in the memory.
– Critical
Critical
When this parameter is enabled, all entries of the category "Critical" are displayed.
– Warning
warning
When this parameter is enabled, all entries of the category "Warning" are displayed.
– Info
Informative
When this parameter is enabled, all entries of the category "Info" are displayed.
Configuring with Web Based Management
4.4 "Information" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 91
To Next Page
Loading...
Need help?
General
