4.5.4.5 Passwords
There are files to which access is password protected. To successfully load the file into the
device, enter the password specified for the file on the WBM page.
Description
The table has the following columns:
● Type
Shows the file type.
● Description
Shows the short description of the file type.
● Setting
When selected, the password is used. Can only be enabled if the password is configured.
● Password
Enter the password for the file.
● Password Confirmation
Confirm the new password.
● Status
Shows whether the current settings for the file match the device.
– Valid
The settings are valid.
– Invalid
the settings are invalid.
– '-'
Status cannot be evaluated
– Required
To successfully load the file into the device, enter the password set for the file.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
136 Configuration Manual, 11/2019, C79000-G8976-C388-08
To Next Page
Loading...
