3. If necessary check the reachability of the RADIUS server.
4. Click the "Set Values" button.
Repeat this procedure for every server you want to enter.
Modifying servers
1. In the relevant row, enter the following data in the input boxes:
– RADIUS Server Address
– Server Port
– Shared Secret
– Shared Secret Conf
– Max. Retrans.
– Primary Server
2. If necessary check the reachability of the RADIUS server.
3. Click the "Set Values" button.
Repeat this procedure for every server whose entry you want to modify.
Deleting servers
1. Click the check box in the first column before the row you want to delete to select the entry
for deletion.
Repeat this for all entries you want to delete.
2. Click the "Delete" button. The data is deleted from the memory of the device and the page
is updated.
4.9.4 Certificates
4.9.4.1 Overview
All loaded files (certificates and keys) are shown on this WBM page. You have the following
options for loading files on the device:
● System > Load&Save > HTTP
● System > Load&Save > TFTP
● System > Load&Save > SFTP
Configuring with Web Based Management
4.9 "Security" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 265
To Next Page
Loading...
