4.5.3 Restart
Resetting to the defaults
Using the WBM page, you can restart the device manually or as scheduled. In addition, there
are various options for resetting to the device defaults.
Note
Note the following points about restarting a device:
● You can only restart the device with administrator privileges.
● A device should only be restarted with the buttons of this menu and not by a power cycle on
the device.
● If the device is in "Trial" mode, configuration modifications must be saved manually before
a restart. Any modifications you have made only become active on the device after clicking
the "Set values" button on the relevant WBM page.
● If the device is in "Automatic Save" mode, the last changes are saved automatically before
a restart.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 121
To Next Page
Loading...
Need help?
General
