4.9.5 Firewall
4.9.5.1 General
On this WBM page, you enable the firewall.
Note
Please remember that if you disable the firewall, your internal network is unprotected.
Description
The page contains the following:
● Activate Firewall
When enabled, the firewall is active.
● TCP Idle Timeout [s]
Enter the required time in seconds. If no data exchange takes place, the TCP connection is
terminated automatically when this time has elapsed.
The range of values is 1 to 21474836.
Default setting: 86400 seconds
● UDP Idle Timeout [s]
Enter the required time in seconds. If no data exchange takes place, the UDP connection is
terminated automatically when this time has elapsed.
The range of values is 1 to 21474836.
Default setting: 300 seconds
● ICMP Idle Timeout [s]
Enter the required time in seconds. If no data exchange takes place, the ICMP connection
is terminated automatically when this time has elapsed.
The range of values is 1 to 21474836.
Default setting: 300 seconds
Configuring with Web Based Management
4.9 "Security" menu
SCALANCE S615 Web Based Management
270 Configuration Manual, 11/2019, C79000-G8976-C388-08
To Next Page
Loading...
