4.5.7.3 v3 Groups
Security settings and assigning permissions
SNMP version 3 allows permissions to be assigned, authentication, and encryption at protocol
level. The security level and read/write permissions are assigned according to groups. The
settings automatically apply to every member of a group.
Description
The page contains the following boxes:
● Group Name
Enter the name of the group. The maximum length is 32 characters.
● Security Level
Select the security level (authentication, encryption) valid for the selected group. The
available options are as follows:
– No Auth/no Priv
No authentication enabled/no encryption enabled.
– Auth/no Priv
Authentication enabled/no encryption enabled.
– Auth/Priv
Authentication enabled/encryption enabled.
The table has the following columns:
● Select
Select the row you want to delete.
● Group Name
Shows the defined group names.
● Security Level
Shows the configured security level.
● Read
Enable or disable read access for the required group.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 151
To Next Page
Loading...
